C-4 conversion (neutral safety switch)

[SLORunner]

We are currently switching out my roomates 5-spd for a TransPros C-4 in his 93 Ranger. I was wondering what some of you have done for neutral safety switches in place of the clutch start wiring. We are using an Art Carr shifter. Any help would be great, thanks.

Jake

[hoeker]

art carr has a switch available that mounts right on the shifter.

[singlehanded]

I am just not running one.

[SLORunner]

Hoeker-
Do you know if you can get that from McKenzie's? Thanks for the help.

[orvacian]

I see you are in Brea (at least 50%of the time?). I am pretty good with that kinda stuff, and I live by Brea and Bastanchury. I will pm you my phone number. I was just planning to be in my garage working on my own engine/transmission swap tomorrow anyway, so I could stop by and I am sure we can fugure it out. If the actual Art Carr switch is not easily available, I unfortunately have a entire catalog of switches permanently commited to memory from working at Orvac electronics for several years http://www.race-dezert.com/vb3/attachments/old/images/graemlins/wink.gifLOL

[toddz]

They have a switch available that they call the "gate safety switch" for their shifters(P/N 75735 on their website). It's more of a "Park safety switch" imho. I have one at home that I bought from Winters years ago and never installed. I think it costs about $30-$35 new. You can have mine for $5 if you're interested.

Todd Z.