Foddril

[obr184]

Does anyone know where I can get the following foddril parts real soon, the list has just come through from Australia and was a little late, we will be leaving vegas on thursday then on to laughlin then to L.A. for 3 days after laughlin, if anyone knows where i can get the following list during that time please contact me.

Front top arms.2 off required 1.3\4 dia x 7" to fit in beam, from beam face to outer mounting face kingpin is 8"(offset).From centre of beam to centre off outer face is 9.250"(trailing)

Top arms are the same but have shock mounts
2 off required

Kingpins 2 off required 7.600" long , bolt centres are 5.350" x 7\8 dia , pin dia is 1.750"

Retaining pins 4 off required 7\8 dia x 4.700" from the shoulder long with 3\4 dia thread

thankyou for your help.

[MikeLeung]

Call Fodrils direct and ask them to bring the parts to Laughlin

[SANDlessNSeattle]

McKenzie's...or Mckenzie's......maybe Mckenzie's.......or you could try Mckenzie's

[KAVORKA]

go to Nevada Off Road on Valley View in Vegas. Bob will either have the parts, or help you get them.

[Wayne_Nosala]

Upper Fodrell arms with shock mounts may be hard to find in stock. Best
route would to get a hold of Danny Fodrell directly. He may have to make
them & most likely could not be done in a week. You may even have to bring
him an old one to copy it, they are not all made exactly the same. A close up
picture of the arm posted here may help. Also, There are sales people from
Mckenzie's & Kartec that post here occasionally that may be able to identify
the arm. The other parts sould be easy to obtain.
Wayne

[bpthirteen]

Foddrill Fabrication
623-582-2499

You can give Jake a call. I have some misc. arms at the shop. He could tell you if they fit your specs.

949-366-8402

[obr184]

sweet, thanks everyone, got throught to rich Minga and he passed us on to Foddril. thanks alot for all your help