2002 Ford F150 build at H&M

[Alex Paterson]

Seems I have collected enough pics to show decent progress on my F150 that is being built over at H&M. I am very happy with the build and expect it back October. I fisrt started using H&M back in 2004 and have been very happy with there work and needless to say I am very happy with the current build and can't wait to get it out there.

Specs:

H&M front suspension with ProAM hubs and 13.5" Wilwood rotos. 17" wheel travel
H&M rear 4 link, 29" wheel travel
H&M 9" housing with 35 inner and 40 spline axels, ProAm hubs and Willwood breaks, Detroit locker and 5.0 gears
King Shocks front 2.5' bypass and 2.5 C/O and rear 2.5 c/o and 3.0 3 tube bypass
King bumps
41.5 Racer X Cell
Trailer Products 1 piece front clip and 6" bedsides
3 Mastercraft seats with Crow Harness's
PWR Raditor
2 PWR tranny coolers
Walker Evens Beadlocks and 37" Goodyear GSA's
2" Chromo Cage front to back
Howe power steering pump and res
Fiberwerxs Carbon Fiber dash
Auto Meter guages
Momo Steering wheel and quick disconnect.

[Alex Paterson]

More pics,

[Alex Paterson]

And the last of them for now,

-Alex

[E&S Racing]

Looks awesome. I have always loved the work put out by H&M...Good luck can't wait to see it finished.

[bcampbell04]

trucks looking good. h & m does great work.

[therail]

That's all bolt in stuff, correct? haha, nice looking truck.

[ASHCRAFT]

That's all bolt in stuff, correct? haha, nice looking truck.

Just the front arms are bolt on. The kit works great. I pulled 17 inchs of travel bumped and strapped on my truck. the truck looks even better in person.

[Alex Paterson]

Just the front arms are bolt on. The kit works great. I pulled 17 inchs of travel bumped and strapped on my truck. the truck looks even better in person.

You guys have had or are having a few nice toys come out of there as well. :)

Alex

[ASHCRAFT]

You guys have had or are having a few nice toys come out of there as well. :)

Alex

For sure. Just a couple more weeks and it will be time to test.

[Alex Paterson]

Some more updates,

[ErikShallbetter]

I've always liked HnM's work..the truck looks like its coming along nice. Should be sweet when it's done.

[Alex Paterson]

Looking forward to a late October early November finish. Should be a fun little ride, thanks for all the complements.

Alex

[StGeorge-Motorsports.com]

H&M have always done great work. Keep the pics coming as the truck moves along.

[charlie_brown]

any updates??

[Alex Paterson]

H&M has made some progress on it but nothing in picture form. The pulled off of it for a bit to get some other projects wrapped up, which is fine with me. I would expect November return to my casa.

I am starting to get excited about it as it is getting close. They have the trailing arms mounted up and were working on rear shock placement. Honestly I really want to have it ready to prerun Parker next year so I am not too concerned at this time about it...its been kinda nice having it out of my garage :) It will have a little bit of work at E&J Wire Works and then some odds and ends, maybe paint and body, I will have to see.

Alex

[Alex Paterson]

As of today,

http://img.photobucket.com/albums/v335/dezertf150/HnM%20F150/outside6.jpg

http://img.photobucket.com/albums/v335/dezertf150/HnM%20F150/outside5.jpg

Alex

[E&S Racing]

Looks great bro...They do nice work

[Alex Paterson]

Wells, its back and a lot of fun to drive so far. I am looking forward to getting it all dialed in and have all the cosmetic stuff finished up.

-Alex

http://img.photobucket.com/albums/v335/dezertf150/HnM%20F150/TestDay021.jpg

http://img.photobucket.com/albums/v335/dezertf150/HnM%20F150/TestDay018.jpg

http://img.photobucket.com/albums/v335/dezertf150/HnM%20F150/TestDay017.jpg

[Endo242@link]

Congrats! I've been waiting to see it out of the shop. Can't wait to see it finished!

[Dezertpilot]

Looks awesome! I bet you are super stoked:)

[EL YOGI]

truck looks very good!! Im getting a lot of new ideas from this truck!! keep them comming!

[Alex Paterson]

Thanks guys, I a super stoked on it. I have been getting the body ready for paint so I can put the front and rear glass in (windshield) so I can take it down and get it back on the street to drive.

Anyone in AZ have a hook up on paint. I will have most of the body work done just need it cleaned up a little to make sure paint goes on good and then have it painted. I had a hook up but it went south (price went WAY up)

-Alex

[fas_guy]

Thanks guys, I a super stoked on it. I have been getting the body ready for paint so I can put the front and rear glass in (windshield) so I can take it down and get it back on the street to drive.

Anyone in AZ have a hook up on paint. I will have most of the body work done just need it cleaned up a little to make sure paint goes on good and then have it painted. I had a hook up but it went south (price went WAY up)

-Alex

Yeah my friend Mike paints lots of off highend and race stuff- street bikes, race trucks, cars, you name it. He's pretty good with fiberglass too. His shop is in Sierra Vista about 50 Min. south of Tucson I can set you up with him, He just matched some glass fenders up on my budys titan.

[Alex Paterson]

Thought I would post a quick vid from today, nothing huge, but its alive and working well,

YouTube - F150 Prerunner, small jump

-Alex

[Steven_Tolbert]

Freakin sweet!!!

[Alex Paterson]

Just out playing on Saturday, not a TT but fun none the less :)

YouTube - More Prerunner F150

-alex