New Kreger 2-1600!!

[J.COLEMAN]

I am sure that Brad wilson and everyone at penhall fab are extremely excited for their new car and so I thought that I would share my excitement for my new KREGER FABRICATION 2-1600! This car actually belongs to Luis and Roberto out of Cabo San Lucas. They had plans of racing the Baja 500 next week but due to other engagements I do believe they are not going to make it. Look for them soon and me soon after that!

A few notes - This car is completly engineered and built in house at Kreger Fabrication.
The entire chassis is fixtured throughout. Even the wiring harness!
Top of the line- best of the best parts and most importantly built to new SCORE rules.

[Dan McMillin]

Does Brad Wilson have one on order?

[J.COLEMAN]

More pics...:)

[nimrod]

That is a beautiful car. Thanks for sharing and best of luck.

[desertracer]

Super clean car! I love the way everything up under the hood/dash area is well thought out. One quick question...is the battery switch(I assume thats what it is on the passengers side) able to be switched from inside the car, maybe its an optical illusion from the picture. Good luck with it.

[BHTool]

I love the Salty Dawg!

http://www.bunaphoto.com/Kreger16.JPG

oh ya the car is nice to

props to the Kreger boyz

[Bajades]

Probably the cleanest construction I've seen on a 16 car. Nice job guys!

[bcampbell04]

Does Brad Wilson have one on order?

brad wilson has a penhall "coyote" 1-2 1600 being built right now dan

[J.COLEMAN]

Super clean car! I love the way everything up under the hood/dash area is well thought out. One quick question...is the battery switch(I assume thats what it is on the passengers side) able to be switched from inside the car, maybe its an optical illusion from the picture. Good luck with it.


Thanks, the battery switch is on the passenger side and is accessible from the inside of the car.

[Robinson1672]

Sweet dash

[schofox racing]

awesome

[UOURacing]

Visit Kreger's website. Every one of their designs looks so well thought out and super clean. I love the class 10 car they do, and this is the first 2-1600 from them I have seen. What a great looking car! I know you are very proud, I know I would be! Great luck with it!

[Wilson1600]

Does Brad Wilson have one on order?

Ya dan we do have a penhall on order at the moment and we hope to have it by july and possibly race it at Primm or the SNORE 250..... Also Sammy Ehranberg and LJ Kennedy are possibly going to drive it at the baja 1000

[bcampbell04]

car looks amazing. i'm sure you can't wait to get yours and start racing it jason

[Riviera one]

sweet car

[DRIVE Jon]

That car almost makes me want to forget about 1450 and go 1/2 1600!!!

veranice!!

[J.COLEMAN]

That car almost makes me want to forget about 1450 and go 1/2 1600!!!

veranice!!

Come on! Just skip a step... Kreger has a few 12 cars and a few 10 cars goin on the table and then he is going to do another batch of 1600 cars so get your order in now! Oh and thats not to mention the fuerte chassis's that are ready to go too!

[J.COLEMAN]

car looks amazing. i'm sure you can't wait to get yours and start racing it jason

Thanks, my patience are wearing... I am getting very excited!

[J.COLEMAN]

Visit Kreger's website. Every one of their designs looks so well thought out and super clean. I love the class 10 car they do, and this is the first 2-1600 from them I have seen. What a great looking car! I know you are very proud, I know I would be! Great luck with it!

You hit it right on... that is one thing about Kreger that they do well.. they think through everything before working on that part of the car. All the wiring,plumbing, tubes etc are designed before a tube is layed on the cars. I am very fortunate to race with Hutchins in their 10 car and pre-run in their Fuertes and it never ceases to amaze us all every time we get in them how great these cars are and how well they handle.

www.kregerfab.com

[snoreracer]

what does the car weight dry

[doug969]

Come on! Just skip a step... Kreger has a few 12 cars and a few 10 cars goin on the table and then he is going to do another batch of 1600 cars so get your order in now! Oh and thats not to mention the fuerte chassis's that are ready to go too!

any pics of the 12 chassis? any idea what the price will be????

[J.COLEMAN]

any pics of the 12 chassis? any idea what the price will be????

The 12 car chassis will be similar to my chassis and the 10 car chassis cab but with wider beam and 10 car trailing arms i believe.... he is almost done with the 10 cars on the table and 12 cars are next. So no pictures of the new version yet. Call Derek Kreger for pricing. I am not so sure on that.

714. 289.9048
www.kregerfab.com

[J.COLEMAN]

what does the car weight dry

I am not sure of my weight yet... Due to the new chassis rules per SCORE (tubing diameter etc)- We automatically are giving up weight to the grandfathered chassis.. there is just no way around that.

[C. Bucher]

I am not sure of my weight yet... Due to the new chassis rules per SCORE (tubing diameter etc)- We automatically are giving up weight to the grandfathered chassis.. there is just no way around that.

I keep hearing that minimum weight in the 1600's is going up thirty pounds to compensate for the extra material being used on the newer cars being built per the new SCORE Tech standards.

I suppose older cars will have to add balast.

Car looks really nice!

[bellocchi]

welcome to the round roof Kreger 1600 club :) we have tested the car upside down and sideways and seems to fare well most of the time.

although im not shure we'll be @ any Score races anytime soon to swap some paint. :D

[151fab]

I love the Salty Dawg!

http://www.bunaphoto.com/Kreger16.JPG

oh ya the car is nice to

props to the Kreger boyz

Ha, I learned how to drink there!!!:D :D :D

You used to see the stickers everywhere "Where the he** is the Salty Dog!".

I love the round roof look. Your seeing more and more of that rolled radius look instead of everything having 6" radius's and straights.:)

[matt_helton]

the 12 cars will be identical to the 10 cars all the way up to the A-pillars. then instead of the floor tubes curving up to the mid rail to clear the font suspension they will just shoot straight to the beam. the mid rails are identical too, just as a side note.

[J.COLEMAN]

I keep hearing that minimum weight in the 1600's is going up thirty pounds to compensate for the extra material being used on the newer cars being built per the new SCORE Tech standards.

I suppose older cars will have to add balast.

Car looks really nice!

I hope they up the weight...it would only be fair.

Thanks!

[J.COLEMAN]

welcome to the round roof Kreger 1600 club :) we have tested the car upside down and sideways and seems to fare well most of the time.

although im not shure we'll be @ any Score races anytime soon to swap some paint. :D

Its a great club! :) Which car do you have?

[C.J. Hutchins]

I would expect nothing less than perfection from Kreger's shop. Anyone who knows them would understand. Beautiful car guys, gotta love the hard lines for the power steering too!!

[matt_helton]

ok, our first round roof 12 car is off the table now and will be finished in the coming weeks for a very anxious customer! heres some pics.

[JGOLDEN]

Is there a minimum weight limit in Class 12?

[KREGER FAB]

Is there a minimum weight limit in Class 12?

Not yet! Savage keeps saying hes changing all the classes and making minimum weights. Not sure how I feel about it in 12 and 10. 1600 for sure. It is just really hard on the manufacture side to build things as light as last years cars with another fab shop telling you how to build it. Luckily our cars are smaller that most to start with.;) Come on James....You need a new 12 car! We have more going on the table!:D

[dirtdudeaz]

The only thing that bothers me is the back of the car. The engine compartment has no cross bar in it on the side. It looks like a big open space for a car to bump into the side and kill the exhaust, headers, etc.... Or a hit from the back looks like itd fold up the back end with the top back of the role cage as the pivot. just my .02

This is an awesome looking car though, great detail, new features, and very very clean. I'd take one in a heart beat!

[matt_helton]

the pictured chssis is not complete. there are alot more tubes that will/are being added as we speak. no worries my friend we build a stout car. im sure we'll post some updated pics here real soon to show the progress.

[KREGER FAB]

Three more going on the table now.

[J.COLEMAN]

Three more going on the table now.

Are they all going to be turnkeyed?