SoCal Wiring Shops

[Rufrider]

Any good wiring shops around? Need great quality and super klean!!!

Thanks in Advance.

[shrek]

What do you need?

Full Race vehicle wiring, or just a small job???

Shrek

[partybarge_pilot]

E&J in Escondido.

[J.JOHNSON]

Pro Wire. Addvertises In Dusty Times And Dirt Sports. A Lot Of Car Manuf. Use Him Exclusively

[DMSRACE]

Jax Motorsports...909-319-4183...good clean work fair price...

[Rufrider]

What do you need?

Full Race vehicle wiring, or just a small job???

Shrek

full race....

[Tony_Barraza]

Wayne-

Here are some resources for you, many of them alreay mentioned.

E&J Wireworks
Escondido
760.738.9473

Heywire Solutions - Shig or Ken
Chula Vista
619.279.3123 (Shig)
619.252.4800 (Ken)

Pro Wire - Joey Davitian
Was Sylmar/Now San Diego County & Mobile
818.364.2755

Race Trash Engineering - Pete Dutton
High Desert (Landers)
714-270-6711

Taylor Motorsports*
San Jacinto
951.654.9605
*Wiring guy not in-house, but works out of their shop

I hope that helps get you started!

Good luck!

[ELITE10CAR]

I would recommend Robby at Thunderworks. He has wired all of the McMillin's stuff, most Jimco's, etc. I know Thunderworks did all of the wiring on the GM Vortec trophy trucks. I don't think they(Thunderworks) do wiring anymore, but I know Robby does it on the side. He can go to your shop and take care of it also. He did my 10 car.

[partybarge_pilot]

I would recommend Robby at Thunderworks. He has wired all of the McMillin's stuff, most Jimco's, etc. I know Thunderworks did all of the wiring on the GM Vortec trophy trucks. I don't think they(Thunderworks) do wiring anymore, but I know Robby does it on the side. He can go to your shop and take care of it also. He did my 10 car.

Actually, E&J has been doing a lot of the McMilions stuff latley.

[Chris_Wilson]

Thunderworks wired my prerunner / 8 truck from scratch. If they still take on
jobs like that, they will do a 1st class job.

[BajaBronco13]

Do you guys know of any shops in the Los Angeles area? I have a full size Bronco that I need to replace the entire wiring harness from front to back. I have a replacement harness from Painless wiring but I'd rather leaving the wiring to the pros. Any shops you'd like to recommend in Los Angeles would be nice. Thanks.

BajaBronco13

[streamline]

Long Beach area.. GP wiring (562) 233-5560 (Greg)

[partybarge_pilot]

I have a replacement harness from Painless wiring but I'd rather leaving the wiring to the pros.
BajaBronco13

Do yourself a favor and lose the painless kit. They are "ok" for a street driver hot rod that see's ocasional use. They will not hold up to hard off roading for long.

[BajaBronco13]

Partybarge, you should see the hack job that was done on my bronco by the last owner so wiring managed by the Enron Corporation would be better, lol. What would you suggest and I'm on a budget so I wanted to replace as much wiring as possible.

[partybarge_pilot]

Actually, I would belive it. When I was working at Wireworks We had a Bronco come in that had a painless kit, some of the stock wiring, 2 other off brand fuse pannels and a whole bunch of random fuse holders mounted in defferent spots around the cab.

IF your on a budget, use the wires from the painiess kit for the color coding since you have them. Replace the fuse block with self resetting breakers and use weatherpack connetors everywhere.

You can do this yourself, it's not that hard.

You can get everything you need from http://www.waytekwire.com/site-map.htm

If you do a search, there was a topic a while back on electrical suppliers.

[BajaBronco13]

Thanks PartyBarge. I'll check out WayTek Wire. I'm afraid my Bronco is going to burn down to the ground if I turn on the radio or the windshield wipers, lol.

[Scrapiron]

Actually, E&J has been doing a lot of the McMilions stuff latley.

Marks new car was done buy Joey at ProWire. I saw it was my own two eye's.

[havahockey]

I'm taking my truck down to E&J Wireworks tonight. I'll post up some photos after I get it back.

[havahockey]

Update:

I dropped my truck off last Monday night to E&J Wireworks. He was very helpful and answered all the questions I had. He was even nice enough to meet me after hours since I couldn't get there during normal business hours. He told me he'd have my truck done by the end of the week and he delivered it as promised.

All the work is very professional and clean looking. He did everything I asked for and even went the extra step to clean up all my stock wiring I had on the truck. I would definately recomend him to anyone who needs wiring done. He also does a lot of wiring for classic cars, hotrods, etc, so if anyone needs any wiring done I would give him a call for sure. Very standup guy, honest and professional.

E&J Wireworks
Eric - 760-738-9473
http://www.enjwireworks.com

[3MS Engineering]

I'm with the others that recommend doing it yourself. I was lucky enough for Solo Motorsports to let me experiment on their race truck. Now I have almost finished a second truck for my buddy. A massive improvement from my fist job, (Solo's).

http://i97.photobucket.com/albums/l233/blacksheepvictor/Jamess-Wiring0042.jpg

[3MS Engineering]

http://i97.photobucket.com/albums/l233/blacksheepvictor/Jamess-Wiring0040.jpg
http://i97.photobucket.com/albums/l233/blacksheepvictor/Jamess-Wiring0032.jpg
http://i97.photobucket.com/albums/l233/blacksheepvictor/Jamess-Wiring0011.jpg
http://i97.photobucket.com/albums/l233/blacksheepvictor/Jamess-Wiring0027.jpg

[3MS Engineering]

http://i97.photobucket.com/albums/l233/blacksheepvictor/Jamess-Wiring0026.jpg
http://i97.photobucket.com/albums/l233/blacksheepvictor/Jamess-Wiring0008.jpg
http://i97.photobucket.com/albums/l233/blacksheepvictor/Jamess-Wiring0007.jpg