Source for a bolt on 2.5" GN snout?

[MH20]

I've have had no luck finding some sort of bolt on 2.5" Grand National snout for some front hubs. Does anyone even make a snout with a bolt on flange? I was just trying to keep cost down a little bit, but if no one makes one then oh well.

Thanks in advance

[Ryan_P]

When you say "bolt on flange" do you mean a backing plate like below? Even though below is a Kartek backing plate for a bolt-on 2'' snout, it will still give you some reference. Now, do you have to have Grand National? Kartek has a full line, so does CNC, Speedway, Cone, etc.

-Ryan

[MH20]

Im looking for the actual SNOUT that bolts on, I will be having my own backing plate machined. The snout is for these hubs - Speedway Engineering Grand National Aluminum Rear Hubs. If no one makes decent ones then Ill just design a set, but that usually costs more than a prefab set.

[FlyHiFlyLo7]

I seen some at JMR about a month ago. Those speedway hubs are only 5 on 5. You might want to go to 5 on 5.5.

[Ryan_P]

Cone makes a rear snout for the 2.5''. Give John @ Cactus Motorsports a call, he deal heavily with Sandy Cone's products and he has done some of the design to Sandy's products.

http://www.cactusmotorsports.com/

John Tabata @ 805.712.7655

-Ryan

[partybarge_pilot]

Speedway is now making 5x5.5 too.

[FlyHiFlyLo7]

Speedway is now making 5x5.5 too.

Oh really? that's cool.