3rd Members

[John_Bitting]

I know people use PDC for regearing, who do you guys buy your 3rd members from? Should I just go to Currie or does DTS back east have better prices? 3rd member and fuel cell are all I have left to purchase for the blazer.

[FullsizeFun]

Maybe try Superior Axle, Kartek carries them. It is on their webpage.

[hoeker]

john, tell mike at DTS i sent you. 877 874 7327.

i've used several different nodular third members. we've been most happy with the strange unit.

buy it complete, 5 years racing with DTS and Royal Purple oils and we've never had a rear gear failure from improper setup!

[mfs]

jim @ performance 909-923-0827 gave me a real good deal.
or try randys ring & pinion

[DailyPedal]

I used Tri County Gear in Pomona and had really good service. Can't recommend Performance Diff, guy there was the biggest a**hole I have ever tried to give money to.

[mfs]

Can't recommend Performance Diff, guy there was the biggest a**hole I have ever tried to give money to.

ya , but does good work and gets it done fast, dont need to be his buddy. hes all business for sure.

[025]

Hey John, try Jayson over at Tubeworks. He just bought in with Strange is using their Aluminum through bolt design. It has an extra large pinion support I believe 12 bolt, can run a 10" ring although probally better to stick with a 9.5 or 9 for what you are using it for, it can take 46 spline axles. It also has a new oiling design to the pinion. The price I thought was real good. Matt

[motoxscott]

John when I purchased mine I got it directly through Strange Engineering. Their prices were on par with everyone else and I knew it would be set up correctly and use all the best parts. No cheap knock-offs or imports.

- Scott

[Dezertpilot]

Going in to PDC this upcoming Tuesday for a crush sleeve eliminator, 4.88's, spool, and all new bearings to be installed. Seems to be a pretty reasonable price. I have heard nothing but good stuff from this place so I think I will spend my hard earned $ here.

[mustafa]

I've tried searching here and I can't find any info for PDC. Does anyone have a number or site for them? I have a 2001 F250 V10 (with 3:73's I think) and I would
like to change the gearing to improve my towing.

[amrein1743]

PDC's # is 714-671-9753

[Hemp]

pdc is off of lamber and berry, just west of the 57 freeway

pdc does great work....my truck is over there right now getting a new 9"

[mustafa]

Muchas Gracias.

[Dezertpilot]

Ok Hemp I was in there today getting my 4runner spooled and re-geared with all new bearings and seals. Jay was talking to me about what he does and what customers and was talking about your ranger. I should have asked him to show me. You are going full floater right? nice to see that you are taking it to Nestor for the 4 link later on this year should be bitchen when its done. I am really happy so far with PDC if all goes well then it looks like they have another customer for life!:)