Toyota Hubs

[bajaboy]

Hey Guys,

Anybody know of any kind of heavy duty / aftermarket hub for a '91 Toyota PU 2wd?
I seem to be having problems with them constantly.

Thanks, E. Yee

[Oscar]

I've been running ''Gold-Line Racing Product" hubs for two seasons and haven't had a problem with them. I mic. them every four races and they haven't bent yet..

[BIG_FAT_LOSER]

I picked up a set from Jerry at Camburg, $300 a set

[bajaboy]

Thanks Guys,

Where are the Gold Line Racing hubs available?

I think Camburg might have stop making the Toyota hubs, I remember Jerry posting them on here a while back. If there still around , I'll take em!

Thanks Again, E. Yee

[JESSE_at_TLT]

Why invest in better aftermarket hubs designed to work with stock spindles? Has anyone tried to adapt Toyota 4WD IFS spindles to the 2WD suspension? I don't know about the spindle height/inclination, but the steering arm bolts on, so that could be addressed. I know that JD Fab and a few others use the live-axle hubs/spindles, but is there anything that will work with production-based kits?

[91yotaprerunner]

i actually will be switching over to the IFS spindles soon. I bent the modified 2wd one i had during the rollover. So im either going to build a complete custom spindle, or modify the IFS similarly. Either way i need to switch to 6 lug to match the pathfinder rearend already on the truck.

[motoxscott]

I'm pretty sure we have a few sets left of those aluminum hubs. I'll have to check in the morning.

- Scott @ Camburg

[bajaboy]

Sounds good Scott,

I'll give you a call around noon, or just make a post here. Thanks for everyones help again.

E. Yee

[Eric_M]

i just bought a set of hubs a month ago or so from camburg. jerry said hes still got a few sets left.

[motoxscott]

Sorry for just getting back to this post, we were super busy all day. We have a few sets of hubs left so it's not a problem getting your hands on some.

- Scott @ Camburg

[firedog]

we have been racing on stock 2wd hubs for 4+years and have never had a problem with them, we have broken 3 spindle pins and are working on something new.
Paul

[Jerry Zaiden]

The Gold line hubs are old Camburg hubs from 1998 or so.

[curt]

Out of curiosity, what king of problems are you having with the hubs? We've run stocks spindles and hubs for years and we've never had a hub problem. The weak spot is the spindle snout, we've broken them off 3 or 4 times...We will be adapting to the 4wd spindles and uprights this off season...Curt